"Celebrating 15 Years of Customer Service."
The #1 Factory Direct Supplier of Kits on the Web.
Best kits, best instructions, and best support. "Carburetion is all we do!"
Want help figuring out which kit to order? First try our "What Kit Do I Need?" page and
also the new "Simple Explanation" page!
Some Kit Order Links on individual pages are no longer functioning. We apologize for the inconvenience during this website update. If the ones on your page are not functioning, please verify what kit is available for your unit and then
click this link "KIT LIST PAGE FOR ALL GENERATORS AND ENGINES" to go to this temporary kit listing page.
Shop with confidence!
ORDERING & QUESTIONS
Use your credit card and safely and securely order on-line. Or call our office toll free at :
Monday thru Friday 9-4:30 Eastern time. You can place your order over the phone if you feel more comfortable doing that or if you would like to speak with a company representative to answer any further questions you may have.
Please check our BASIC INFO page first.
For our Canada customers call us here in the U.S. toll free at
Photo of an Adapter Installed on a Tecumseh HM100 Engine
The photo above illustrates how most adapters install on an engine. Adapters are just that. They adapt to whatever carburetor an engine has and are installed between the carburetor and air cleaner. Above, you can see the adapter is between the carburetor on the left and the air cleaner assembly on the right.
This is basically how they work:
The Adapter has a hose running to it from the demand type regulator supplied in the kit. The center of the adapter has a venturi. A venturi has a opening in the middle and its shape resembles a doughnut. All around the edge of the center opening are many small holes. As air passes through the center opening and over the many small holes, fuel from the regulator is delivered to the air stream. How much fuel depends on how much air is passing over the holes which depends on how far the throttle is open based on the governor.
People often ask about power loss with the adapter style kits. We have never had a complaint about power loss with any of our kits.
After the installation, the engine should be tested right away on gasoline. If a reduction in performance is noticed on gasoline you may choose to remove the adapter when using gasoline. This usually takes only a few minutes though it is often not necessary.
So basically, adapter kits are not a conversion, they are an adaptation.
High Pressure Bi-Fuel Kit Type 2 Price For Most Engine Brands Including Some V-Twins:
Low Pressure Tri-Fuel Kit Type 4 Price For Most Engine Brands Including Some V-Twins:
Low Pressure Type C Price For Most Engine Brands up to and including 12hp:
Use this link to CONTACT US by filling out a request form or contact us
in the U.S. at 1-800-553-5608
or toll free from Canada to our US office 1-800-486-0077.
US Carburetion Kit Center
416 Main Street * Summersville * West Virginia * 26651
Copyright ©1995-2010 US Carburetion, Inc. All rights reserved.