GBVE8000 Kits

propane generator conversion kit

"Celebrating 18 Years of Customer Service."

The #1 Factory Direct Supplier of Kits on the Web.

Best kits, best instructions, and best support. "Carburetion is all we do!"

Home

We have Professionally Equipped Yamaha Generators Ready to run on Propane, Natural Gas and Gasoline. Click here to learn more . . .      Want help figuring out which kit to order?  First try our "What Kit Do I Need?" page and

also the new "Simple Explanation" page!

"Yamaha

 Tri-Fuel

 Generators"

PLEASE NOTE:

Some Kit Order Links on individual pages are no longer functioning.  We apologize for the inconvenience during this website update.  If the ones on your page are not functioning, please verify what kit is available for your unit and then

click this link "KIT LIST PAGE FOR ALL GENERATORS AND ENGINES" to go to this temporary kit listing page.

 

Search for any Generator or Engine number. See results below:

Quick"

Help Links

 

ALL ENGINES 12hp or smaller use

A & C Kits

 

ALL ENGINES 13hp or Larger use

Type 1 Kits

Dedicated High Pressure Propane

 

Type 2 Kits

Bi-Fuel Propane and Gasoline

 

Type 3 Kits
Dedicated Natural Gas and Low Pressure Propane


Type 4 Kits
Tri-Fuel Natural Gas, Propane, and Gasoline

 

Remote Start
The parts needed to start a generator remotely by wire or even wireless

 

What Kit do I need?

Don't know what kit is best for your application?

Click this link for a Simple Chart that should help you decide what is your best kit choice.

Check Out

or

View Cart

 

Shop with confidence!

and  

Official PayPal Seal

 

 

Monday August 09, 2010

News & Features

Kit Production Update:

Production

 is currently at:

1-3 days

As always, some kits take a little longer due to heavy order volume. 

Kit Center Regular Hours of Operation:

Monday thru Friday

9:00 am - 4:30 pm

Eastern Time.

 

If you require assistance please fill out a request form using this link

Tech Help

 or the email address found in your Master Conversion Instruction Booklet.

(end)

 

ORDERING & QUESTIONS

Use your credit card and safely and securely  order on-line.  Or call our office toll free at :

1-800-553-5608

 Monday thru Friday 9-4:30 Eastern time.  You can place your order over the phone if you feel more comfortable doing that or if you would like to speak with a company  representative to answer any further questions you may have. 

Please check our BASIC INFO page first.

 

1-800-553-5608

 

For our Canada customers call us here in the U.S. toll free at

1-800-486-0077.

 

 

Devilbiss GBVE8000

If you're not sure what each type of kit means, click on the Quick Help Links to the left for more details.

All 4 types of kits are available for your Generator and clicking on the  link will allow you to add the appropriate kit to your shopping cart.  If you want to also add an accessory for remote start, connecting to portable cylinders, quick disconnects, and more, just click on the  "Continue Shopping" button when you are taken to the next screen. 

 Accessories can be ordered by choosing to continue shopping after adding the kit to your cart or can be viewed ahead of time by using this link: ACCESSORIES

Generator

Description

Type 1

$187

Type 2

$227

Type 3

$227

Type 4

$267

GBVE8000

Kit Rating 3 1 3 1

 

Kit Rating Explanation

1 Easiest-simple mechanical skill required.  This kit uses an adapter that is installed between the carburetor and air cleaner assembly.  Longer screws, gaskets, and other necessary parts are included.  Usually no drilling is required except to mount the regulator bracket to the frame of the generator.  A 12 page instruction booklet is included.

2 Moderate-Better than average mechanical skill required.  This kit requires drilling the existing carburetor. A standard drill bit is required to make the existing passage larger to accept the new fuel tube and another to enlarge the idle mixture screw for a better vacuum signal.  No drill press or precise drilling is required because the passages are already there, they just have to be enlarged.  Drilling is also required to mount the regulator bracket to the frame of the generator.  All mounting parts and a 12 page instruction booklet is included.

3 Challenging-Above average mechanical skill required.  This kit requires drilling the existing carburetor and tapping thread for the new fuel tube. A standard drill bit and tap is required to make the existing passage larger and make threads to accept the new fuel tube.  Another drill bit is needed to enlarge the idle mixture screw for a better vacuum signal.  No drill press or precise drilling is required because the passage is already there, it just has to be enlarged and the threads tapped.  Drilling is also required to mount the regulator bracket to the frame of the generator.  All mounting parts and a 12 page instruction booklet is included.

Use this link to CONTACT US by filling out a request form or contact us

in the U.S. at 1-800-553-5608

or toll free from Canada to our US office 1-800-486-0077.

US Carburetion Kit Center

416 Main Street * Summersville * West Virginia * 26651

Copyright ©1995-2010  US Carburetion, Inc.  All rights reserved.