LP Gas

propane generator conversion kit

"Celebrating 18 Years of Customer Service."

The #1 Factory Direct Supplier of Kits on the Web.

Best kits, best instructions, and best support. "Carburetion is all we do!"

Home Up

We have Professionally Equipped Yamaha Generators Ready to run on Propane, Natural Gas and Gasoline. Click here to learn more . . .      Want help figuring out which kit to order?  First try our "What Kit Do I Need?" page and

also the new "Simple Explanation" page!

"Yamaha

 Tri-Fuel

 Generators"

PLEASE NOTE:

Some Kit Order Links on individual pages are no longer functioning.  We apologize for the inconvenience during this website update.  If the ones on your page are not functioning, please verify what kit is available for your unit and then

click this link "KIT LIST PAGE FOR ALL GENERATORS AND ENGINES" to go to this temporary kit listing page.

 

Search for any Generator or Engine number. See results below:

Quick"

Help Links

 

ALL ENGINES 12hp or smaller use

A & C Kits

 

ALL ENGINES 13hp or Larger use

Type 1 Kits

Dedicated High Pressure Propane

 

Type 2 Kits

Bi-Fuel Propane and Gasoline

 

Type 3 Kits
Dedicated Natural Gas and Low Pressure Propane


Type 4 Kits
Tri-Fuel Natural Gas, Propane, and Gasoline

 

Remote Start
The parts needed to start a generator remotely by wire or even wireless

 

What Kit do I need?

Don't know what kit is best for your application?

Click this link for a Simple Chart that should help you decide what is your best kit choice.

Check Out

or

View Cart

 

Shop with confidence!

and  

Official PayPal Seal

 

 

Monday August 09, 2010

News & Features

Kit Production Update:

Production

 is currently at:

1-3 days

As always, some kits take a little longer due to heavy order volume. 

Kit Center Regular Hours of Operation:

Monday thru Friday

9:00 am - 4:30 pm

Eastern Time.

 

If you require assistance please fill out a request form using this link

Tech Help

 or the email address found in your Master Conversion Instruction Booklet.

(end)

 

ORDERING & QUESTIONS

Use your credit card and safely and securely  order on-line.  Or call our office toll free at :

1-800-553-5608

 Monday thru Friday 9-4:30 Eastern time.  You can place your order over the phone if you feel more comfortable doing that or if you would like to speak with a company  representative to answer any further questions you may have. 

Please check our BASIC INFO page first.

 

1-800-553-5608

 

For our Canada customers call us here in the U.S. toll free at

1-800-486-0077.

 

 

LP Gas

In the alternate fuel industry, LP Gas and Propane are synonymous.  They are the same product with different labels.  Propane is a liquefied petroleum product and has become slang for the term LP Gas.

Shown here, the black area is liquid propane (though crystal clear) and the white space above it is propane vapor.  The bubbles are the liquid "boiling" when vapor is drawn off the top of the cylinder or tank.

Here we explain LP Gas consumption, cylinder vaporization, and the size cylinder required to run a certain horsepower generator.

LP Gas Consumption Rate  

Using some basic factors, round numbers and some good estimates, this is how run time values of LP Gas cylinders can be worked out:  

BASIC FACTORS

bullet

It requires 2 horsepower to produce 1000 watts of energy per hour

bullet

Under load, each horsepower consumes 10,000 BTU per hour

bullet

LP Gas contains 92,000 BTU per gallon

bullet

LP Gas weighs 4.2 pounds per gallon 

bullet

Cylinders are rated by their weight capacity of LP Gas

 

Cylinder Capacities in Gallons and BTU's 

Size Gallon Capacity Total BTU Capacity

20#

4.8 441,600
30# 7.1 653,200
40# 9.5 874,000
60# 14.3 1,315,600
100# 23.8 2,189,600
200# 47.2 4,342,400
420# 99.1 9,117,200

Using these factors we can arrive at run times based on average load for any generator.  

For instance:

How long would a 5000 Watt Generator with a 10 HP engine at 50% load run on a 20# LP Gas cylinder?

10hp at 50% load would be using 5 horse power to generate 2500 watts of energy.

5hp x 10,000 btu would consume 50,000 btu per hour.  

Using a 20# cylinder that produces 441,600 total btu, the engine consuming 50,000 btu per hour would run for about 8.8 hours.

BTU consumption chart based on generator/engine size and load

Generator Wattage Engine Horsepower Full Load 75% Load 50% Load
1850 3.5 35,000 26,250 17,500
4000 8 80,000 60,000 40,000
5000 10 100,000 75,000 50,000
7500 15.5 155,000 116,250 77,500
8000 16 160,000 120,000 80,000
10,000 20 200,000 150,000 100,000
12,000 24 240,000 180,000 120,000

Many people want to know what size cylinders they need based on their engine size.  Here are some real conservative estimates of the vaporization rate of various size cylinders based on the outside temperature. 

Vaporization Rates of Cylinders  

Output in BTU's per hour - Vertical Cylinder 25% full - Minimum Cylinder Pressure 10 PSI

                                                          Cylinder Size

Outside Temperature 20 30 40 100 200 420
+60F 24,000 32,000 40,100 79,700 125,900 185,500
+50F 21,200 28,300 35,500 70,600 111,500 164,300
+40F 18,450 24,700 31,000 61,500 97,200 143,100
+30F 15,700 21,000 26,400 52,400 82,800 122,000
+20F 13,000 17,300 21,800 43,300 68,400 100,700
+10F 10,250 13,700 17,200 34,200 54,000 79,500
0 7,500 10,000 12,600 25,000 39,500 58,300
-10F 4,780 6,400 8,000 16,000 25,300 37,100
-20F 2,050 2,700 3,400 6,800 10,700 15,900

For the physical properties of each cylinder, click on the "Cylinder Size" above.

What does all this mean?

Well, if you went exactly by the chart, you would need a 420# cylinder to run a 14hp engine if it was 25% full and 40 degrees outside and keep a minimum of 10 psi in the cylinder.  This is a worse case scenario.  For instance, when a 20# cylinder is full it can run a 16hp engine for quite some time in 40 degree weather before there will be any freezing problem. But if you wanted to use up all the gas in a cylinder, it would have to be sized according to the chart.

 

Here is why.   LP Gas is stored as a liquid under pressure and boils to produce a vapor that is drawn off at the top for the engine to use as the fuel.  Because LP Gas boils at -44° (below zero), the gas will freeze if it can not absorb enough ambient heat to compensate for the boiling process.  The bigger the cylinder is compared to the amount of load, the warmer it is outside, the warmer the cylinder is kept, all are a determining factor in the likelihood of a cylinder freezing up. 

If a sweat or frost line forms around the cylinder at the level of the fuel, this is a telltale sign that the cylinder over worked and is in the process of freeze up.  If the gas does freeze, it will stop producing vapor and the pressure inside the cylinder will drop to as low as zero psi which will cause the engine to stop running. 

 
To compensate for an undersize cylinder, two cylinders can be tied together using a tee check and pigtails.  Some customers set the cylinder near the exhaust of the engine to help keep the cylinder warm and have no problem using smaller tanks on bigger engines. This practice needs to be carefully monitored so that the cylinder does not overheat and cause the relief valve to check off. 

Use this link to CONTACT US by filling out a request form or contact us

in the U.S. at 1-800-553-5608

or toll free from Canada to our US office 1-800-486-0077.

US Carburetion Kit Center

416 Main Street * Summersville * West Virginia * 26651

Copyright ©1995-2010  US Carburetion, Inc.  All rights reserved.